PRTG Manual: SNMP HP LaserJet Hardware Sensor

<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: SNMP HP LaserJet Hardware Sensor

The SNMP HP LaserJet Hardware sensor monitors performance counters on an HP LaserJet hardware device via the Simple Network Management Protocol (SNMP).

The SNMP HP LaserJet Hardware sensor does not appear as a running sensor, instead it is created as an SNMP Custom Advanced sensor.

The following performance counters are available:

Toner/Status
Paper/Status
Jam/Status

SNMP HP LaserJet Hardware Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: SNMP HP LaserJet Hardware
French: HP LaserJet matériel (SNMP)
German: SNMP HP LaserJet Hardware
Japanese: SNMP HP LaserJet ハードウェア
Portuguese: Hardware HP LaserJet (SNMP)
Russian: Оборудование HP LaserJet по SNMP
Simplified Chinese: SNMP HP LaserJet 硬件
Spanish: Hardware HP LaserJet (SNMP)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a very low performance impact.
Lookups	This sensor uses lookups to determine the status values of one or more channels.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

hplaserjet

For more information about basic sensor settings, see section Sensor Settings.

HP LaserJet Specific

Setting	Description
Interface	The name of the interface (performance counter) that this sensor monitors.
If Value Changes	Define what the sensor does when its value changes: Ignore (default): Do nothing. Trigger 'change' notification: Send an internal message that indicates a change. In combination with a change trigger, you can use this to trigger a notification if a change occurs.

Setting

Description

Interface

The name of the interface (performance counter) that this sensor monitors.

If Value Changes

Define what the sensor does when its value changes:

Ignore (default): Do nothing.

Trigger 'change' notification: Send an internal message that indicates a change.
In combination with a change trigger, you can use this to trigger a notification if a change occurs.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Jam	The paper jam status Up status: No Jam Detected Down status: Paper Jam Detected
Paper	The paper status Up status: Paper Okay Down status: Manual Paper Feed Required, Out Of Paper Or No Cassette Loaded
Toner	The toner status Up status: Toner Okay Warning status: Toner Low Down status: No Toner Cartridge Loaded

KNOWLEDGE BASE

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108

My SNMP sensors don’t work. What can I do?

https://kb.paessler.com/en/topic/46863